AUTOLift 3000

The Original Portable Tilting Car Jack

The AUTOLift3000 is the original tilting, portable car jack, great for any private or commercial garage. No air no power supply required.
The AUTOLift3000 is extremely easy to use. It doesn’t need installation works, special tools, or specialist training.
It’s portable and can be used anywhere. You don’t need compressed air, and there are no wires to worry about. The lifting action is provided by an ordinary electric drill (stronger cordless drills will also work, as will hand cranks and ratchets).

There’s no need to squeeze under your car on a creeper anymore or perch your vehicle precariously on a hand jack. Instead of using dangerous, outdated lifting solutions, use the industry’s first portable tilting car jack, the AUTOLift3000. Join more than 20,000 satisfied mechanics on all continents. You’ll save time and make your work on any vehicle safe and easy. Every car enthusiast or mechanic will appreciate product’s versatility.

20+

Years on the Market

20,000+

Satisfied customers

80+

Countries

200,000

Cars lifted

Lifts up to 3000 kg

The AUTOLift3000 is certified to lift up to 3,000 kg.

Lifts high and fast

Lifting to maximum height (60 cm) takes no more than 30 seconds.

Maintenance free

The AUTOLift3000 is completely maintenance-free. It is a fully mechanical device that does not require safety inspections, regular maintenance, or permanent mounting.

Lightweight

At just 45 kg, the AUTOLift3000 can be operated and handled by a single person.

Compact

The AUTOLift3000 is highly compact, folding down to just 12 cm tall. It can also be hung on a wall.

Usable indoors and out

The AUTOLift3000 can be used indoors and outdoors. It’s water resistant and can even be used on uneven surfaces.

2-year product warranty

Every AUTOLift3000 portable car lift comes with a no-nonsense 2-year product warranty, and a 1-year warranty on accessories.

Tilts the vehicle forward and back

The AUTOLift3000 allows you to tilt the lifted vehicle on its center axis, lifting either the front or rear off the ground. Lifting the car by a point near its center of mass makes tilting easy enough for a single operator.

Trusted high-quality product

The AUTOLift3000 is available in 80 countries with more than 20,000 units sold and delivered. It’s designed, manufactured, and assembled in the EU in an ISO 9001:2015 certified factory. Each unit is carefully tested for quality and material strength, and comes with a manufacturer’s inspection certificate. The AUTOLift3000 is in active use at one of Europe’s largest carmakers.

Tech specs

In The Box

Pair of Skirt Pads

SAfety Pin

Set (2) of uneven surface rails

Set (2) Wall Hangers

Set (4) of Drill adapters

Horizontal support stand

What is the maximum capacity of the AUTOLift3000?

The AUTOLift3000 is certified up to 3,000 kg. While the device has been stress-tested to much greater weights, for your safety it is nonetheless strictly forbidden to exceed the certified limit.

What kind of drill can I use?

Standard power drills only. Make sure to keep the hammer function off if it has one. Never use any tool that generates shocks (e.g. impact or pneumatic wrench). The recommended torque to lift the device is 309 inch-lb / 25 ft-lb.

Can I use the AUTOLift3000 for my truck?

The tool can only be used with unibody passenger cars, which trucks typically are NOT. The car also must not exceed the maximum weight capacity of 3000kg, and must have ground clearance at least a little higher than the height of the folded product (115 mm). To lift a lower-riding car, you will need a ramp.

How long can I leave the car lifted?

For as long as needed (weeks, months, a year).

Can the AUTOLift3000 accidentally tilt over? Is it safe?

Even when a car is lifted by its center of mass, a certain amount of effort is needed to tilt it over. It cannot really tip over on its own, unless you substantially change the weight distribution by removing heavy parts (e.g. engine, gearbox, clutch). When doing work that removes or adds substantial weight to the car, always use the support stand to prevent unexpected tilting.

How do I find a car's center of mass?

Without factory schematics or specialized equipment, you will need to use trial and error. For a front-engined car, try putting the lift pads about 10 cm behind the front wheels. Lift the car up just a little, and see if it tilts easily. If not, lower it back down and move the AUTOLift3000 closer to the end that didn’t lift off the ground.

What should I do if my car has plastic skirts?

On some cars (e.g. the Mercedes-Benz CLA and some other German cars), the plastic parts are firmly attached to the undercarriage frame. On cars where this is not the case, use the provided skirt pads. Place the pad on the AUTOLift3000 contact surface and make sure it will come to rest on a load-bearing undercarriage part. Before lifting the car, check that the lift pads don’t rest on any fragile body parts. We cannot be held responsible for any damage to your car that may result from failure to follow these instructions.